Tsunami Superflake and Diamond Red Spray Cans on Yamaha Motorcycle

TSUNAMI SUPERFLAKE AND DIAMOND RED SPRAY CANS | YAMAHA MOTORCYCLE

Tsunami Superflake and Diamond Red Spray Cans on Yamaha MotorcycleTsunami Superflake and Diamond Red Spray Cans on Yamaha MotorcycleTsunami Superflake and Diamond Red Spray Cans on Yamaha MotorcycleTsunami Superflake and Diamond Red Spray Cans on Yamaha MotorcycleTsunami Superflake and Diamond Red Spray Cans on Yamaha MotorcycleTsunami Superflake and Diamond Red Spray Cans on Yamaha MotorcycleTsunami Superflake and Diamond Red Spray Cans on Yamaha Motorcycle

It all started with an idea, a vision that sparked in the mind of Kim Sonnikson. Inspired to craft something extraordinary, Kim embarked on a journey to bring the Yamadragon to life. The goal? To create not just a machine, but a marvel that would dominate the roads with its style and power. To achieve this, she utilized our Tsunami Superflake Spray Can for the dragon scales and Diamond Red Spray Can for the trims over Car-Rep 2k Black Epoxy Primer and finished off with Car-Rep 2k High Gloss Topcoat Aerosol Spray Can.

Installer: Kim Sonnikson

Coating: Car-Rep

Pigments needed for this look:

- Tsunami Superflake Pearl Spray Can (for dragon scales)

- Diamond Red Spray Can (for the trims)


Other Products needed for this look:

- Alpha Automotive Paint HP-2010 Top Dawg Adhesion Promoter

- Car-Rep 2k Black Epoxy Primer Spray Can

- Car-Rep 2k High Gloss Topcoat Aerosol Spray Can

Like all of our Alpha Pigments Spray Cans,Tsunami Superflake and Diamond Red can be topped with Alpha Automotive Paint Clearcoat or other good UV-resistant clearcoats. These colors are available in Automotive Paint, Dry Pearl Pigment & Vehicle Paint Kits as well.

This project uses an Alpha Custom Color basecoat, bound in a special binder for pigment control, UV resistance, and excellent pearl suspension. The basecoat mixes 1:1 with an AR-30xx reducer for smooth application and consistent coverage. Our AP-7541 DTM Primer-Sealer provides outstanding adhesion, flexibility and fast drying, while the AC-4521 HS Glamour Clearcoat adds long-lasting gloss, UV protection and durability.

Project Step-by-Step Guide

  1. Complete your prep, body work, primer, and sanding following our video tutorials.
  2. Block-sand the exterior panels with 320 grit sandpaper and scuff door jambs, engine bay and tight areas with a red scuff pad.
  3. Blow off all dust outside and wipe down with wax & grease remover.
  4. If applicable, paint the door jambs and engine bay first, then wait 24 hours before moving on to the exterior.
  5. Re-mask and wipe down the project with anti-static wax & grease remover.
  6. Mix and spray one medium wet coat of AP-7541 DTM Primer-Sealer (4:1:1 ratio) using a 1.4 mm needle spray gun.
  7. After the sealer is 100% dry to the touch, wait at least an hour.
  8. Mix and spray your basecoat colour directly over the sealer (most colours require 2–4 coats for coverage/effect).
  9. Wait until the basecoat is dry to the touch before recoating.
  10. After the final basecoat is dry, wait 45 minutes.
  11. Mix and spray 2–3 coats of AC-4521 HS Glamour Clearcoat (2:1 ratio). Recoat when the previous coat is just tacky (fingerprints).
  12. Let cure for 12 hours in a warm, ventilated area.
  13. If wet sanding & buffing, leave masked for that process; otherwise unmask & assemble.
  14. Enjoy your newly painted project!

Follow us on Instagram and Tommy Knows Paint for more projects and tips.

Back to blog