SILVER SUPERFLAKE PEARL OVER PITCH BLACK | AUTOFLEX COATINGS | TESLA MODEL S

Here's a unique color combo for you! This Tesla Model S is showcasing our Silver Superflake Pearl over a Pitch Black basecoat. This superflake compliments the black very well as it really highlights the overall ride! This is a great color combination for those who enjoy a dark colored ride with a bit of flare to match. Topped off with a high gloss finish, this is sure to be one sleek Tesla!

Installer: Finest Dips Auto Customs

Coating: Autoflex Coatings peelable paint

Pigments needed for this look:

- Pitch Black basecoat

- Silver Superflake Pearl (5g/gal ; 1 coat)

- High gloss finish

Like all of our pearl pigments, Silver Superflake Pearls can be used in Alpha Automotive Paint or other traditional automotive paint, epoxy resin for woodworking and other art, nail polish, plastisol, Autoflex Coatings, Performix Plastidip, Halo efx, DYC Proline, waterbased airbrush paint, slime, bed liners, powder coat and MANY other applications! Take a look at our Alpha Pearl Mixing and Uses Page for more information!

This project uses an Alpha Custom Color basecoat, bound in a special binder for pigment control, UV resistance, and excellent pearl suspension. The basecoat mixes 1:1 with an AR-30xx reducer for smooth application and consistent coverage. Our AP-7541 DTM Primer-Sealer provides outstanding adhesion, flexibility and fast drying, while the AC-4521 HS Glamour Clearcoat adds long-lasting gloss, UV protection and durability.

Project Step-by-Step Guide

1. Complete your prep, body work, primer, and sanding following our video tutorials.
2. Block-sand the exterior panels with 320 grit sandpaper and scuff door jambs, engine bay and tight areas with a red scuff pad.
3. Blow off all dust outside and wipe down with wax & grease remover.
4. If applicable, paint the door jambs and engine bay first, then wait 24 hours before moving on to the exterior.
5. Re-mask and wipe down the project with anti-static wax & grease remover.
6. Mix and spray one medium wet coat of AP-7541 DTM Primer-Sealer (4:1:1 ratio) using a 1.4 mm needle spray gun.
7. After the sealer is 100% dry to the touch, wait at least an hour.
8. Mix and spray your basecoat colour directly over the sealer (most colours require 2–4 coats for coverage/effect).
9. Wait until the basecoat is dry to the touch before recoating.
10. After the final basecoat is dry, wait 45 minutes.
11. Mix and spray 2–3 coats of AC-4521 HS Glamour Clearcoat (2:1 ratio). Recoat when the previous coat is just tacky (fingerprints).
12. Let cure for 12 hours in a warm, ventilated area.
13. If wet sanding & buffing, leave masked for that process; otherwise unmask & assemble.
14. Enjoy your newly painted project!

Follow us on Instagram and Tommy Knows Paint for more projects and tips.