OEM PORSCHE MIAMI BLUE | AUTOFLEX COATINGS | TESLA MODEL X - The Spray Source

OEM PORSCHE MIAMI BLUE | AUTOFLEX COATINGS | TESLA MODEL X

OEM Porsche Miami Blue on Tesla Model XOEM Porsche Miami Blue on Tesla Model XOEM Porsche Miami Blue on Tesla Model XOEM Porsche Miami Blue on Tesla Model XOEM Porsche Miami Blue on Tesla Model XOEM Porsche Miami Blue on Tesla Model XOEM Porsche Miami Blue on Tesla Model XOEM Porsche Miami Blue on Tesla Model X

It's a love affair like no other - the enchanting allure of our OEM Porsche Miami Blue meets the allure of this Tesla Model X. The result is a vehicle that exudes confidence, elegance, and eco-consciousness all at once. Finest Dips' careful application brings out the best in both the color and the electric SUV, making it a match made to be adored!

Installer: Finest Dips

Coating: AutoFlex Coatings

Pigments needed for this look:

- OEM Porsche Miami Blue Drop-In Pigment

Like all of our other OEM Color Matching Pigments, Porsche Miami Blue can be used in Autoflex Coatings, Performix Plastidip, Halo efx, DYC Proline, bed liners, and other applications (test prior to use)!

This project uses an Alpha Custom Color basecoat, bound in a special binder for pigment control, UV resistance, and excellent pearl suspension. The basecoat mixes 1:1 with an AR-30xx reducer for smooth application and consistent coverage. Our AP-7541 DTM Primer-Sealer provides outstanding adhesion, flexibility and fast drying, while the AC-4521 HS Glamour Clearcoat adds long-lasting gloss, UV protection and durability.

Project Step-by-Step Guide

  1. Complete your prep, body work, primer, and sanding following our video tutorials.
  2. Block-sand the exterior panels with 320 grit sandpaper and scuff door jambs, engine bay and tight areas with a red scuff pad.
  3. Blow off all dust outside and wipe down with wax & grease remover.
  4. If applicable, paint the door jambs and engine bay first, then wait 24 hours before moving on to the exterior.
  5. Re-mask and wipe down the project with anti-static wax & grease remover.
  6. Mix and spray one medium wet coat of AP-7541 DTM Primer-Sealer (4:1:1 ratio) using a 1.4 mm needle spray gun.
  7. After the sealer is 100% dry to the touch, wait at least an hour.
  8. Mix and spray your basecoat colour directly over the sealer (most colours require 2–4 coats for coverage/effect).
  9. Wait until the basecoat is dry to the touch before recoating.
  10. After the final basecoat is dry, wait 45 minutes.
  11. Mix and spray 2–3 coats of AC-4521 HS Glamour Clearcoat (2:1 ratio). Recoat when the previous coat is just tacky (fingerprints).
  12. Let cure for 12 hours in a warm, ventilated area.
  13. If wet sanding & buffing, leave masked for that process; otherwise unmask & assemble.
  14. Enjoy your newly painted project!

Follow us on Instagram and Tommy Knows Paint for more projects and tips.

Back to blog