BMW SMOKED TOPAZ METALLIC | AUTOFLEX COATINGS | BMW M3
Rose City Dip has once again proven their expertise and artistry with this stunning custom BMW M3. The jaw-dropping transformation showcases the exceptional beauty of our OEM BMW Smoked Topaz Metallic, turning an already impressive vehicle into a true work of automotive art. Simply flawless in execution, this project highlights the power of expert craftsmanship and premium materials to elevate a car's aesthetic to new heights. Hats off to Rose City Dip for their outstanding work!
Installer: Rose City Dip
Coating: AutoFlex Coatings
Pigments needed for this look:
- OEM BMW Smoked Topaz Metallic Drop-In Pigment
- Gloss Finish
Like all of our other OEM Color Matching Pigments, BMW Smoked Topaz Metallic can be used in Autoflex Coatings, Performix Plastidip, Halo efx, DYC Proline, bed liners, and other applications (test prior to use)!
This project uses an Alpha Custom Color basecoat, bound in a special binder for pigment control, UV resistance, and excellent pearl suspension. The basecoat mixes 1:1 with an AR-30xx reducer for smooth application and consistent coverage. Our AP-7541 DTM Primer-Sealer provides outstanding adhesion, flexibility and fast drying, while the AC-4521 HS Glamour Clearcoat adds long-lasting gloss, UV protection and durability.
Project Step-by-Step Guide
- Complete your prep, body work, primer, and sanding following our video tutorials.
- Block-sand the exterior panels with 320 grit sandpaper and scuff door jambs, engine bay and tight areas with a red scuff pad.
- Blow off all dust outside and wipe down with wax & grease remover.
- If applicable, paint the door jambs and engine bay first, then wait 24 hours before moving on to the exterior.
- Re-mask and wipe down the project with anti-static wax & grease remover.
- Mix and spray one medium wet coat of AP-7541 DTM Primer-Sealer (4:1:1 ratio) using a 1.4 mm needle spray gun.
- After the sealer is 100% dry to the touch, wait at least an hour.
- Mix and spray your basecoat colour directly over the sealer (most colours require 2–4 coats for coverage/effect).
- Wait until the basecoat is dry to the touch before recoating.
- After the final basecoat is dry, wait 45 minutes.
- Mix and spray 2–3 coats of AC-4521 HS Glamour Clearcoat (2:1 ratio). Recoat when the previous coat is just tacky (fingerprints).
- Let cure for 12 hours in a warm, ventilated area.
- If wet sanding & buffing, leave masked for that process; otherwise unmask & assemble.
- Enjoy your newly painted project!
Follow us on Instagram and Tommy Knows Paint for more projects and tips.
