COASTAL COLORSHIFT, T-REX COLORSHIFT, AND DIAMOND GOLD | 25 FOOT DRAGON SCULPTURE - The Spray Source

COASTAL COLORSHIFT, T-REX COLORSHIFT, AND DIAMOND GOLD | 25 FOOT DRAGON SCULPTURE

This incredible work of art spans over 25 feet long from nose to tail and stands at 8 feet tall from the ground to the tip of its wing! This steel dragon named Erasmus is made by the guys over at Beechwood Metalworks and they did an amazing job on this piece using our Coastal Colorshift for the body as well as our T-Rex Colorshift and Diamond Gold pearls for the eyes! This is truly a one of a kind sculpture!

Installer: Beechwood Metalworks

Pigments needed for this look:

- Coastal Colorshift Pearl on the body

- T-Rex Colorshift Pearl on the eyes

- Diamond Gold Pearl on the eyes

Like all of our pearl pigments, Coastal Colorshift, T-Rex Colorshift, and Diamond Gold Pearls can be used in Alpha Automotive Paint or other traditional automotive paint, epoxy resin for woodworking and other art, nail polish, plastisol, Autoflex Coatings, Performix Plastidip, Halo efx, DYC Proline, waterbased airbrush paint, slime, bed liners, powder coat and MANY other applications! Take a look at our Alpha Pearl Mixing and Uses Page for more information! These colors are available in Automotive Paint & Aerosol Spray Cans as well.

This project uses an Alpha Custom Color basecoat, bound in a special binder for pigment control, UV resistance, and excellent pearl suspension. The basecoat mixes 1:1 with an AR-30xx reducer for smooth application and consistent coverage. Our AP-7541 DTM Primer-Sealer provides outstanding adhesion, flexibility and fast drying, while the AC-4521 HS Glamour Clearcoat adds long-lasting gloss, UV protection and durability.

Project Step-by-Step Guide

  1. Complete your prep, body work, primer, and sanding following our video tutorials.
  2. Block-sand the exterior panels with 320 grit sandpaper and scuff door jambs, engine bay and tight areas with a red scuff pad.
  3. Blow off all dust outside and wipe down with wax & grease remover.
  4. If applicable, paint the door jambs and engine bay first, then wait 24 hours before moving on to the exterior.
  5. Re-mask and wipe down the project with anti-static wax & grease remover.
  6. Mix and spray one medium wet coat of AP-7541 DTM Primer-Sealer (4:1:1 ratio) using a 1.4 mm needle spray gun.
  7. After the sealer is 100% dry to the touch, wait at least an hour.
  8. Mix and spray your basecoat colour directly over the sealer (most colours require 2–4 coats for coverage/effect).
  9. Wait until the basecoat is dry to the touch before recoating.
  10. After the final basecoat is dry, wait 45 minutes.
  11. Mix and spray 2–3 coats of AC-4521 HS Glamour Clearcoat (2:1 ratio). Recoat when the previous coat is just tacky (fingerprints).
  12. Let cure for 12 hours in a warm, ventilated area.
  13. If wet sanding & buffing, leave masked for that process; otherwise unmask & assemble.
  14. Enjoy your newly painted project!

Follow us on Instagram and Tommy Knows Paint for more projects and tips.

Back to blog