Skip to product information

Zenith Super Colorshift Spray Can Midcoat

Zenith Super Colorshift Spray Can Midcoat

Counts toward up to 20% off when you spend $300+

Black FridayEnds Mon, Nov 30

Up To 20% Off When You Spend $300+

  • 10%$300+
  • 15%$600+
  • 20%$1,000+
  • + Suit$1,500+

This item counts toward it. Applied automatically at checkout.

Select Color Quantity How Many Cans Do I Need?
★ This is a Tri-Stage Color & Requires mist Undercoat
Zenith Super Colorshift Spray Can Midcoat
$54.99
(2) Spraycan Kit
Includes Required Undercoat mist
-
1
+
next
 
Color
2
Groundcoats
3
2k Top Coat
4
+
Finish the Job
step image

Description

Zenith Super Colorshift Spray Can Midcoat

Zenith Super Colorshift is a white-particle color shift pearl in green, gold, rose, pink, copper and bronze. It gives a ghost effect over lighter solid colors like white, green or blue, and full coverage over black.

  • Finish: Pearl, Color shift
  • Best over: Tri-stage: white sealer, then Mist Green (or Wicked White) as the ground coat, then this color; or black for full coverage
  • Ready to spray: pre-mixed and reduced. Just shake and spray.
  • This is a 1K basecoat: top it with our 2K HS Spray Can Clearcoat or another 2K clearcoat.

Colors look different on every screen, so we recommend a painted sample first.

Application & Prep

STEP 1 – CLEAN THE SURFACE

1 - Wash with soap and water, rinse, and dry completely.

2 - Degrease using wax and grease remover or isopropyl alcohol.

3 - Wipe dry with a clean, lint-free towel.

STEP 2 – SCUFF / SAND FOR ADHESION

If Raw Plastic / Polyurethane: Evenly scuff bare plastic or raw surfaces. These will also need to be adhesion promoted prior to paint using our WolfBite Adhesion promoter.

If Good Condition OEM Paint: Sand smooth or glossy paint with P320-P400 grit sand paper or Scuff Pad until uniformly dull with no glossy areas.

If Surface Needs Bodywork or heavy scratches removed: Sand the damaged areas with 180 grit (feathered out into the panel) then do your bodywork. Finish in 220 Grit sanding. Then spot prime with high build primer - fading the primer out into the rest of the sanded panel covering the bodywork and any 220 grit scratches. (the good condition areas of the panel should have been sanded in 320-400 or scuff pad). Lastly, after the high build primer is dry and ready to be sanded (check tds for timeline), sand with 320-400 to match the rest of the panel.

After The above prep: Remove dust with compressed air or a clean microfiber towel.

STEP 3 – FINAL WIPE & TACK

1 - Wipe the surface again with isopropyl alcohol or wax and grease remover.

2 - Allow solvents to fully evaporate.

3 - Lightly wipe with a tack cloth immediately before spraying. Do not press hard. (optional but great step)

STEP 4 – SET UP YOUR SPRAY AREA

1 - Use a well-ventilated, well-lit area with good extraction fans

2 - Ideal conditions are 65–75°F (18–24°C) with 40–60% relative humidity.

3 - Keep the area free of open flames, sparks, or ignition sources.

4 - Wet the floor if your space allows to keep dust down

5 - Cover any items or areas in your space that you do not want to get overspray on

STEP 5 – PERSONAL PROTECTION

1 - Wear a respirator rated for organic or solvent vapors.

2 - Use nitrile gloves and safety goggles.

3 - Wear a paint suit

STEP 6 – SHAKE THE CAN

1 - Shake vigorously for 45–60 seconds.

2 - Invert the can several times while shaking to fully mix pigments and metallics.

STEP 7 – TEST SPRAY

ALWAYS DO A TEST SPRAY + SPRAY OUT CARD IF DOING OEM SPOT JOBS

1 - Spray on cardboard or a scrap panel.

2 - Confirm even spray pattern, correct color, and proper atomization.

3 - Adjust the spray can's nozzle to match your spray style or surface.

4 - If the can is not operating correctly, remove the cap completely, reseat it on the can, and twise the entire nozzle 360 degrees. Since our cans are made to order, sometimes there is slight paint build up and reseating the nozzle corrects this.

STEP 8 – SPRAYING TECHNIQUE

1 - Hold the can 5–6 inches from the surface.

2 - Keep the can perpendicular, 90 degrees to the panel at all times.

3 - Move at a steady speed using smooth, even passes. You are looking for medium wet coats NOT super wet, pooling coats.

4 - Overlap each pass by 50 percent.

STEP 9 – TRIGGER CONTROL

1 - Begin moving before pulling the trigger. Start off of the panel then move onto the panel. This avoids build up on edges.

2 - Fully depress the trigger while spraying.

3 - Release the trigger completely at the end of each pass.

4 - Stop spraying after clearing the panel edge by an inch.

STEP 10 – COATS & FLASH TIMES

1k Primer/Sealer

1 - Spray a medium wet coat on the entire panel (if not blending oem paint) to achieve a 75% coverage. This fills in the sanding scratches as well as gives a uniform , required ground coat color for the next steps.

2- Allow to flash dry for 5-15 minutes. Time depends on the product and environment.

3 - Apply the second medium-wet coat to achieve full coverage

4 - Allow to dry for 30 minutes or until the wet look fades so a dull, even finish and is completely dry to the touch.

GROUNDCOATS or SOLID COLORS (BEFORE MIDCOATS IF APPLICABLE)

This is for our Base Black, OEM Undercoats or solid colored basecoats. Not all projects require this step.

1 - Apply the first medium-wet coat at approximately 75 percent coverage.

2 - Allow to flash 5-15 minutes or until the wet look fades so a dull, even finish. Time depends on the product and environment.

3 - Apply the second medium-wet coat to achieve full coverage

4 - Allow to flash 5-15 minutes or until the wet look fades so a dull, even finish. Time depends on the product and environment.

5 - Apply a Third medium wet coat if the color is not 100% covered and even at this point. This will vary based on the color and product being sprayed.

4 - Flash another 15-30 minutes. Until the surface is even, dull, an dry to the touch.

MIDCOAT , CUSTOM COLORS , OR METALLIC/ PEARL OEM

This is for coverage over required groundcoats , not "ghost effect"

1 - Apply medium coats over the required groundcoat for your color.

2 - Flash 5–15 minutes between coats or until tack-free.

3 - Apply additional coats until the desired color depth is achieved. Most custom and oem colors require 2-4 medium coats - check color description or compare to existing oem panels

4 - Apply 1 light "control" coat to make sure all of the pearl or metallic is even and not splotchy or "tiger striped"

5 - Once the entire surface, even cracks and crevices, is completely dry to the touch, wait 15 minutes in a temperature-controlled paint booth. In any other environment at 70°F or warmer, wait 30 minutes to 1 hour. Then move on to the topcoat step.

EFFECT PEARL / COLORSHIFT COAT

This is for effect over light groundcoats (not for coverage)

1 - Apply one light effect coat at approximately 25 percent coverage.

2 - Allow 5-15mins for the coat to flash before adding another light coat (if you want to add more effect)

Repeat as many times to your preference of effect and coverage.

3 - Once the entire surface, even cracks and crevices, is completely dry to the touch, wait 15 minutes in a temperature-controlled paint booth. In any other environment at 70°F or warmer, wait 30 minutes to 1 hour. Then move on to the topcoat step.

STEP 11 – CLEANUP & STORAGE

CAP CLEARING

1 - Turn the can upside down after spraying.

2 - Spray until only clear propellant comes out.

3 - This clears paint from the valve and prevents clogging.

NOZZLE CARE

1 - Remove the spray nozzle after use.

2 - Wipe clean with solvent.

3 - Do not soak the nozzle in solvent.

STORAGE

1 - Store cans upright in a cool, dry place.

2 - Keep away from direct sunlight.

3 - Avoid freezing conditions.

4 - Do not store above 120°F (49°C).

QUICK TROUBLESHOOTING

1 - Dry or rough texture means the can is too far away or moving too fast.

2 - Runs or sags mean the can is too close or moving too slowly.

3 - Continue to shake and agitate the can between coats- Repeat step 6

4 - If ever unsure the color is 100% covered (and you are going for coverage) - one extra coat is always a good idea.

Frequent Questions
Do I Need Sealer Or Groundcoat?
YES! All of our basecoat spray cans require a specific colored groundcoat for proper hue and coverage. Sealer is HIGHLY recommended for adhesion, surfacing, and is many times REQUIRED based on the basecoat color or projects condition.
Do I Need Clearcoat?
YES! All of our basecoat spray cans REQUIRE 2k clearcoat sprayed on top of them. This not only gives the final finish (gloss or matte) but also provides durability and UV resistance.
Do I Need High Build Primer?
If you are not spraying it over our epoxy sealer you will need to sand with either 600 grit or a gray scuff pad.
View full details

What Makes Our Spray Cans Different!

Recently viewed

Customer Reviews

Overall rating: 5.0 / 5 from 9 reviews.

Customer photo review of Zenith Super Colorshift Paint Basecoat Midcoat

Color is exactly what I was looking for, good price and fast shipping

Zenith Super Colorshift Paint Basecoat Midcoat

Store owner replied: Thank you for the feedback, Javier! We’re glad to hear the Zenith Super Colorshift Paint Basecoat Midcoat was exactly what you were looking for and that you had a great experience with pricing and shipping. Your project looks fantastic! 🙌🤝

Customer video review of Zenith Super Colorshift Spray Can Midcoat

Very easy to work with. The results were fantastic. Utube... @1prutsman Tiktok... prutsmanr

Zenith Super Colorshift Spray Can Midcoat

Store owner replied: Thank you for the feedback, Randy! We're glad to hear the process was easy and that you’re happy with the results. Great work! We appreciate your support! 🤝

Customer video review of Zenith Super Colorshift Paint Basecoat Midcoat

Great Customer Service! Fast and Friendly Service with Great Knowledge of the Product! I’ll definitely buy here from now on!

Zenith Super Colorshift Paint Basecoat Midcoat

Store owner replied: Thank you for the feedback, Chancellor! We’re so glad you had a positive experience. We can’t wait to help you again soon! 🤝

Customer video review of Zenith Super Colorshift Paint Basecoat Midcoat

First time shooting a midcoat like this. With the glamour clear it turned out incredible. Very happy with the results and I am not a pro.

Zenith Super Colorshift Paint Basecoat Midcoat

Store owner replied: Thank you for the feedback, Travis! We’re so glad the Zenith Super Colorshift midcoat and Glamour Clearcoat worked out well for you. Your results are amazing! Way to nail it on your first try! 🙌🙌🙌

Customer photo review of Zenith Super Colorshift Spray Can Midcoat

workers great for my door jambs

Zenith Super Colorshift Spray Can Midcoat

Store owner replied: Looks great—thanks for sharing the photos, Senario! We're glad to hear it worked out perfectly for your door jambs. Can’t wait to see how the rest of the project comes together! 🤝

Nice color chains. Good stuff

Zenith Super Colorshift Spray Can Midcoat

Store owner replied: Thank you for the feedback, John! We’re glad you’re loving the Zenith Super Colorshift. We appreciate your support! 🤝

Gorgeous iridescent shift, I'm probably the atypical customer as I work in fabrication and prop building. Beautiful for a set of wings, worked perfectly with white base to create a rainbow effect. I will absolutely buy more of this in the future! I to shout out to the team that helped sort out a shipping issue where the product didn't ship for some reason and I was able to get me a replacement in a timely fashion.

Zenith Super Colorshift Spray Can Midcoat

Store owner replied: Thank you so much for sharing this! We love hearing how professionals use our paints in creative applications. The white base for a rainbow shift is a great tip. We appreciate your patience with shipping and look forward to your next project!

Great product. Great experience. I’ll be back! Highly recommend TSS.

Zenith Super Colorshift Spray Can Midcoat

Store owner replied: Thank you for the feedback, Jeff! We’re so glad the paint met your expectations and that your experience with us was excellent. We’ll be happy to assist you again anytime. Thanks again for choosing us! 🤝

Fast shipping excellent customer service amazing products!!!

Zenith Super Colorshift Paint Basecoat Midcoat

Store owner replied: Thank you so much for your kind words, Roberto! We're glad to hear that you had a great experience with our shipping, customer service, and products. Your feedback means a lot to us. Thanks again for supporting TSS! :)