Scion Strong Blue Metallic 8B6 Touch Up Spray Paint
Start typing to search the colors.
Scion Strong Blue Metallic 8B6 Touch Up Spray Paint
Scion · Paint Code 8B6
Tri-StagePearlMetallic1986–2010
Tri-Stage color: needs the APU108 Undercoat underneath for a factory match.
Buy 3 Basecoat Spray Cans, Get A Free 2K Clear Can
Free gift: 2K Clear Can
Counts toward up to 20% off when you spend $300+
Up To 20% Off When You Spend $300+
- 10%$300+
- 15%$600+
- 20%$1,000+
- + Suit$1,500+
This item counts toward it. Applied automatically at checkout.
OEM Color Details
PICK YOUR COLOR, THEN SLAP ON THE INCLUDED LABEL & DROP IN YOUR MAILBOX. GET STORE CREDIT TOWARD YOUR PAINT.
Color
Color Type
Choose painted sample
Phantom Red Painted Sample (Black Ground Coat)
Scorched Apple Painted Sample (Black Ground Coat)
Cherrywood Painted Sample (Black Ground Coat)
Fever Dream Painted Sample (Black Ground Coat)
Phantom Blue Painted Sample (Black Ground Coat)
Reaper Painted Sample (Black Ground Coat)
Cognac Painted Sample (Black Ground Coat)
Oceanic Painted Sample (Black Ground Coat)
Cascade Blue Painted Sample (Black Ground Coat)
Mystic Blue Painted Sample (Black Ground Coat)
Molten Merlot Painted Sample (Black Ground Coat)
Tidal Wave Painted Sample (Black Ground Coat)
Money Maker Green Painted Sample (Black Ground Coat)
Crimson Copper Painted Sample (Black Ground Coat)
Gunpowder Gray Painted Sample (Black Ground Coat)
Hangman Super Colorshift Painted Sample (Black Ground Coat)
Tinted Green Painted Sample (Black Ground Coat)
Phantom Purple Painted Sample (Black Ground Coat)
Tinted Blue Painted Sample (Black Ground Coat)
Sapphire Steel Painted Sample (Black Ground Coat)
Cadet Gray Painted Sample (Black Ground Coat)
Celestial Purple Painted Sample (Black Ground Coat)
Liberty Blue Painted Sample (Black Ground Coat)
Kentucky Bourbon Painted Sample (Black Ground Coat)
Heatwave Painted Sample (Black Ground Coat)
Peruvian White Painted Sample (White Ground Coat)
Executioner Red Painted Sample (Black Ground Coat)
Tinted Red Painted Sample (Black Ground Coat)
Molasses Painted Sample (Black Ground Coat)
Viridian Blue Painted Sample (Black Ground Coat)
Diamond Purple Painted Sample (Black Ground Coat)
Tinted Copper Painted Sample (Black Ground Coat)
Celadon Green Painted Sample (Black Ground Coat)
Potion Purple Painted Sample (Black Ground Coat)
Indiglo Moon Painted Sample (Black Ground Coat)
Tinted Purple Painted Sample (Black Ground Coat)
Diamond Blue Painted Sample (Black Ground Coat)
Tinted Teal Painted Sample (Black Ground Coat)
Void Black Painted Sample (Black Ground Coat)
Hangman SuperFlake Painted Sample (Black Ground Coat)
Fiery Copper Painted Sample (Black Ground Coat)
Opal Cherry Painted Sample (Black Ground Coat)
Green Elegance Painted Sample (Grey Ground Coat)
Grove Green Painted Sample (Black Ground Coat)
Midnight Purple 3 Alpha Custom Color Painted Sample (Black Ground Coat)
Bonsai Painted Sample (Black Ground Coat)
Arctic Frost Painted Sample (Black Ground Coat)
Tinted Silver Painted Sample (Black Ground Coat)
Oahu Blue Painted Sample (White Ground Coat)
Kinda Blue Painted Sample (White Ground Coat)
Dreamsicle Painted Sample (White Ground Coat)
Luxor Black Painted Sample (Black Ground Coat)
Egyptian Gold Painted Sample (Black Ground Coat)
Aluminized Silver Painted Sample (Black Ground Coat)
Iris Smoke Painted Sample (Grey Ground Coat)
Diamond Green Painted Sample (Black Ground Coat)
Tinted Gold Painted Sample (Black Ground Coat)
Serpent Painted Sample (Black Ground Coat)
Aurora Purple Painted Sample (Black Ground Coat)
Blood Stain Painted Sample (White Ground Coat)
Seaglass Painted Sample (Black Ground Coat)
Blue Elegance Painted Sample (Grey Ground Coat)
Nero SuperFlake Painted Sample (Black Ground Coat)
Diamond Red Painted Sample (Black Ground Coat)
Wineberry Painted Sample (Black Ground Coat)
Aphrodite Super Colorshift Painted Sample (Black Ground Coat)
Mystic Chrome Alpha Custom Painted Sample (Black Ground Coat)
Aluminized Copper Painted Sample (Black Ground Coat)
Brown Sugar Painted Sample (Black Ground Coat)
Champagne Elegance Painted Sample (Gray Ground Coat)
White Elegance Painted Sample (Grey Ground Coat)
Diamond Silver Painted Sample (Black Ground Coat)
Starbeam Painted Sample (White Ground Coat)
Cu-29 Painted Sample (Black Ground Coat)
Ravine Painted Sample (Black Ground Coat)
Jade Green Painted Sample (White Ground Coat)
Raven Super Colorshift Painted Sample (Black Ground Coat)
Gump Green Painted Sample (Black Ground Coat)
Roxy Painted Sample (White Ground Coat)
Tinted Rose Gold Painted Sample (Black Ground Coat)
Moonbeam Painted Sample (White Ground Coat)
Blue Soft Shift Painted Sample (White Ground Coat)
Honey Twist Painted Sample (Black Ground Coat)
Mermaid Tail Painted Sample (Black Ground Coat)
Electro-Violet Painted Sample (Black Ground Coat)
Amazon Green Painted Sample (Black Ground Coat)
Ghoul Painted Sample (Black Ground Coat)
Pitch Black Painted Sample (Black Ground Coat)
Cosmos Painted Sample (Black Ground Coat)
Nero Super Colorshift Painted Sample (Black Ground Coat)
Silvered Rose Painted Sample (Grey Ground Coat)
Mutant Painted Sample (Black Ground Coat)
Mutation Green Painted Sample (Black Ground Coat)
Coral Peach Painted Sample (White Ground Coat)
Lightning Blue Painted Sample (White Ground Coat)
Scarlett Johanson Painted Sample (Black Ground Coat)
Wicked White Painted Sample (White Ground Coat)
Popsicle Painted Sample (Black Ground Coat)
Horizon Colorshift Painted Sample (Black Ground Coat)
KillShot Painted Sample (Black Ground Coat)
Cucumber Elegance Painted Sample (Grey Ground Coat)
Pink Elegance Painted Sample (Grey Ground Coat)
Lime Zest Painted Sample (White Ground Coat)
Dahlia Painted Sample (Black Ground Coat)
Ripple Painted Sample (Black Ground Coat)
Yellow Soft Shift Painted Sample (White Ground Coat)
Sundrop Painted Sample (Black Ground Coat)
Contusion Colorshift Painted Sample (Black Ground Coat)
Silver Holographic Painted Sample (Black Ground Coat)
Diamond Gold Painted Sample (Black Ground Coat)
Buttercup Painted Sample (White Ground Coat)
Iceberg Blue Painted Sample (White Ground Coat)
Purple Soft Shift Painted Sample (White Ground Coat)
Mahogany Metallic Painted Sample (Black Ground Coat)
Tsunami Super Colorshift Painted Sample (Black Ground Coat)
Coastal Colorshift Painted Sample (Black Ground Coat)
Green Soft Shift Painted Sample (White Ground Coat)
Sun Gem Painted Sample (White Ground Coat)
Purple Elegance Painted Sample (Grey Ground Coat)
Raven Superflake Painted Sample (Black Ground Coat)
Chupacabra Painted Sample (Black Ground Coat)
Mist Green Painted Sample (White Ground Coat)
Xenon Colorshift Painted Sample (Black Ground Coat)
Dijon Painted Sample (White Ground Coat)
Zenith Super Colorshift Painted Sample (White Ground Coat)
Hydra Painted Sample (Black Ground Coat)
Aphrodite SuperFlake Painted Sample (Black Ground Coat)
Bayberry Painted Sample (White Ground Coat)
Dicaprio Colorshift Painted Sample (Black Ground Coat)
Hades SuperFlake Painted Sample (Black Ground Coat)
Pink Soft Shift Painted Sample (White Ground Coat)
Slate Gray Painted Sample (Grey Ground Coat)
Tsunami Superflake Painted Sample (Black Ground Coat)
Morning Glory Painted Sample (White Ground Coat)
Crushed Chrome SuperFlake Painted Sample (Black Ground Coat)
Zenith Super Colorshift Painted Sample (Black Ground Coat)
T-Rex Colorshift Painted Sample (Black Ground Coat)
Shanks Blue Painted Sample (Iris Smoke Ground Coat)
Serene Violet Painted Sample (White Ground Coat)
Potentially Purple Painted Sample (White Ground Coat)
Try adjusting the filter or view all products.
Add Painted Samples To Bundle
Add multiple colors so you can compare & fall in love with a paint color for your project!
When toggled on, a prepaid USPS Ground Advantage return label ships with your samples. If you want store credit, just place the samples back in the original packaging, apply the return label, and ship them back. As long as samples arrive in perfect condition, you'll receive store credit for the full purchase amount. No label needed? Just toggle off.
Detail product
Scion Strong Blue Metallic 8B6 Touch Up Spray Paint requires a Gray ground coat. We highly recommend staying in brand with Alpha ground coats: our complete system is made to work together for the right hue, coverage, adhesion and durability. This tri-stage color also needs the APU108 undercoat.
Finish with our 2K clear. We highly recommend staying in brand for guaranteed compatibility: our 2K clear cans are made to go over our basecoat for the right finish, durability and UV protection.
Your kit has everything to spray. These optional add-ons cover prep and finishing work.
Top Picks for Your Kit
Shop More Supplies
Popular
Popular bundles and products.
Swipe for more →
Masking
Scuff & mask kits sized for your project, plus tape, film and covers for everything you’re not painting.
Swipe for more →
Sanding & Body Work
Scuff pads, paper and blocks to prep the surface, and filler, glaze and spreaders for dents.
Swipe for more →
Wet Sand & Buff
Wet sanding kits and paper, compounds and polishes to cut and buff the clear, and coatings to protect it.
Swipe for more →
Safety
Respirators rated for paint and 2K clear, and spray suits.
Swipe for more →
Description
Description
Fix damage on a vehicle that came in Scion 8B6 Strong Blue Metallic, or add this factory color to smaller parts on any other vehicle.
What Scion 8B6 Strong Blue Metallic Looks Like
This is Scion 8B6 Strong Blue Metallic, a dark blue with a tri-coat pearl metallic finish. Fine flake sparkles in direct light and the pearl shifts the shade with the viewing angle. Check that your vehicle's paint code label reads 8B6.
What You Need to Spray It
This is a Tri-Stage color, an advanced job. It requires the APU108 undercoat for the correct hue and coverage; without it, the color won't match. Spray order: Gray AP-7541g Sealer, then the APU108 undercoat, then the color coat, then Alpha Automotive Clearcoat for gloss and protection.
Spraying Tips for Tri-Coat Pearl Metallic
Spray a test panel to find how many mid-coats give the match, then use that number on every panel. Hold the can the same distance and overlap every pass so the flake lies evenly, and blend into the next panel.
Choosing This Spray Can
The spray can is made for spot repairs, scratches and small panels, filled to order with this color. Add the APU108 undercoat spray can; it's linked on this page. Painting a panel? Get the Scion 8B6 basecoat paint. Painting the whole vehicle? The Scion 8B6 complete car paint kit has everything packed together.
Other Names for This Paint
It's the same factory formula as Lexus's Strong Blue Metallic (8B6) and Toyota's Strong Blue Metallic (8B6).
Application & Prep
Application & Prep
STEP 1 – CLEAN THE SURFACE
1 - Wash with soap and water, rinse, and dry completely.
2 - Degrease using wax and grease remover or isopropyl alcohol.
3 - Wipe dry with a clean, lint-free towel.
STEP 2 – SCUFF / SAND FOR ADHESION
If Raw Plastic / Polyurethane: Evenly scuff bare plastic or raw surfaces. These will also need to be adhesion promoted prior to paint using our WolfBite Adhesion promoter.
If Good Condition OEM Paint: Sand smooth or glossy paint with P320-P400 grit sand paper or Scuff Pad until uniformly dull with no glossy areas.
If Surface Needs Bodywork or heavy scratches removed: Sand the damaged areas with 180 grit (feathered out into the panel) then do your bodywork. Finish in 220 Grit sanding. Then spot prime with high build primer - fading the primer out into the rest of the sanded panel covering the bodywork and any 220 grit scratches. (the good condition areas of the panel should have been sanded in 320-400 or scuff pad). Lastly, after the high build primer is dry and ready to be sanded (check tds for timeline), sand with 320-400 to match the rest of the panel.
After The above prep: Remove dust with compressed air or a clean microfiber towel.
STEP 3 – FINAL WIPE & TACK
1 - Wipe the surface again with isopropyl alcohol or wax and grease remover.
2 - Allow solvents to fully evaporate.
3 - Lightly wipe with a tack cloth immediately before spraying. Do not press hard. (optional but great step)
STEP 4 – SET UP YOUR SPRAY AREA
1 - Use a well-ventilated, well-lit area with good extraction fans
2 - Ideal conditions are 65–75°F (18–24°C) with 40–60% relative humidity.
3 - Keep the area free of open flames, sparks, or ignition sources.
4 - Wet the floor if your space allows to keep dust down
5 - Cover any items or areas in your space that you do not want to get overspray on
STEP 5 – PERSONAL PROTECTION
1 - Wear a respirator rated for organic or solvent vapors.
2 - Use nitrile gloves and safety goggles.
3 - Wear a paint suit
STEP 6 – SHAKE THE CAN
1 - Shake vigorously for 45–60 seconds.
2 - Invert the can several times while shaking to fully mix pigments and metallics.
STEP 7 – TEST SPRAY
ALWAYS DO A TEST SPRAY + SPRAY OUT CARD IF DOING OEM SPOT JOBS
1 - Spray on cardboard or a scrap panel.
2 - Confirm even spray pattern, correct color, and proper atomization.
3 - Adjust the spray can's nozzle to match your spray style or surface.
4 - If the can is not operating correctly, remove the cap completely, reseat it on the can, and twise the entire nozzle 360 degrees. Since our cans are made to order, sometimes there is slight paint build up and reseating the nozzle corrects this.
STEP 8 – SPRAYING TECHNIQUE
1 - Hold the can 5–6 inches from the surface.
2 - Keep the can perpendicular, 90 degrees to the panel at all times.
3 - Move at a steady speed using smooth, even passes. You are looking for medium wet coats NOT super wet, pooling coats.
4 - Overlap each pass by 50 percent.
STEP 9 – TRIGGER CONTROL
1 - Begin moving before pulling the trigger. Start off of the panel then move onto the panel. This avoids build up on edges.
2 - Fully depress the trigger while spraying.
3 - Release the trigger completely at the end of each pass.
4 - Stop spraying after clearing the panel edge by an inch.
STEP 10 – COATS & FLASH TIMES
1k Primer/Sealer
1 - Spray a medium wet coat on the entire panel (if not blending oem paint) to achieve a 75% coverage. This fills in the sanding scratches as well as gives a uniform , required ground coat color for the next steps.
2- Allow to flash dry for 5-15 minutes. Time depends on the product and environment.
3 - Apply the second medium-wet coat to achieve full coverage
4 - Allow to dry for 30 minutes or until the wet look fades so a dull, even finish and is completely dry to the touch.
GROUNDCOATS or SOLID COLORS (BEFORE MIDCOATS IF APPLICABLE)
This is for our Base Black, OEM Undercoats or solid colored basecoats. Not all projects require this step.
1 - Apply the first medium-wet coat at approximately 75 percent coverage.
2 - Allow to flash 5-15 minutes or until the wet look fades so a dull, even finish. Time depends on the product and environment.
3 - Apply the second medium-wet coat to achieve full coverage
4 - Allow to flash 5-15 minutes or until the wet look fades so a dull, even finish. Time depends on the product and environment.
5 - Apply a Third medium wet coat if the color is not 100% covered and even at this point. This will vary based on the color and product being sprayed.
4 - Flash another 15-30 minutes. Until the surface is even, dull, an dry to the touch.
MIDCOAT , CUSTOM COLORS , OR METALLIC/ PEARL OEM
This is for coverage over required groundcoats , not "ghost effect"
1 - Apply medium coats over the required groundcoat for your color.
2 - Flash 5–15 minutes between coats or until tack-free.
3 - Apply additional coats until the desired color depth is achieved. Most custom and oem colors require 2-4 medium coats - check color description or compare to existing oem panels
4 - Apply 1 light "control" coat to make sure all of the pearl or metallic is even and not splotchy or "tiger striped"
5 - Once the entire surface, even cracks and crevices, is completely dry to the touch, wait 15 minutes in a temperature-controlled paint booth. In any other environment at 70°F or warmer, wait 30 minutes to 1 hour. Then move on to the topcoat step.
EFFECT PEARL / COLORSHIFT COAT
This is for effect over light groundcoats (not for coverage)
1 - Apply one light effect coat at approximately 25 percent coverage.
2 - Allow 5-15mins for the coat to flash before adding another light coat (if you want to add more effect)
Repeat as many times to your preference of effect and coverage.
3 - Once the entire surface, even cracks and crevices, is completely dry to the touch, wait 15 minutes in a temperature-controlled paint booth. In any other environment at 70°F or warmer, wait 30 minutes to 1 hour. Then move on to the topcoat step.
STEP 11 – CLEANUP & STORAGE
CAP CLEARING
1 - Turn the can upside down after spraying.
2 - Spray until only clear propellant comes out.
3 - This clears paint from the valve and prevents clogging.
NOZZLE CARE
1 - Remove the spray nozzle after use.
2 - Wipe clean with solvent.
3 - Do not soak the nozzle in solvent.
STORAGE
1 - Store cans upright in a cool, dry place.
2 - Keep away from direct sunlight.
3 - Avoid freezing conditions.
4 - Do not store above 120°F (49°C).
QUICK TROUBLESHOOTING
1 - Dry or rough texture means the can is too far away or moving too fast.
2 - Runs or sags mean the can is too close or moving too slowly.
3 - Continue to shake and agitate the can between coats- Repeat step 6
4 - If ever unsure the color is 100% covered (and you are going for coverage) - one extra coat is always a good idea.
Frequent Questions
Will this match my Scion's 8B6 paint?
What years and models use 8B6?
Do I need an undercoat for Strong Blue Metallic?
Where do I find my paint code?
Can I use this color on a vehicle that didn't come with it?
Is Scion 8B6 the same paint as Lexus 8B6?

Scion Strong Blue Metallic 8B6 Touch Up Spray Paint | OEMatch
$55.99 USD
OEMatch Factory Color
Scion Strong Blue Metallic 8B6
Mixed to the factory formula for Scion paint code 8B6, used 1986–2010. Mixed to order, usually ships in 1–3 business days.
Will This Fit My Car?
8B6 Strong Blue Metallic came on 39 vehicles. Pick yours to check.
| Make | Model | Years |
|---|---|---|
| Toyota | Avalon 1994-2000 | 1994–2000 |
| Toyota | Avalon 2000-2005 | 2000–2005 |
| Toyota | Avalon 2005-2013 | 2005 |
| Toyota | Avensis 1997-2003 | 1997–2003 |
| Toyota | Avensis 2003-2009 | 2003–2005 |
| Toyota | Camry 1982-1986 | 1986 |
| Toyota | Camry 1987-1991 | 1987–1991 |
| Toyota | Camry 1991-1996 | 1991–1996 |
| Toyota | Camry 1996-2001 | 1996–2001 |
| Toyota | Camry 2001-2006 | 2001–2005 |
| Toyota | Celica 1987-1989 | 1987–1989 |
| Toyota | Celica 1989-1993 | 1989–1993 |
| Toyota | Celica 1993-1999 | 1993–1999 |
| Toyota | Celica 1999-2006 | 1999–2005 |
| Toyota | Corolla 1983-1987 | 1986–1987 |
| Toyota | Corolla 1987-1992 | 1987–1992 |
| Toyota | Corolla 1991-1997 | 1991–1997 |
| Toyota | Corolla 1995-2002 | 1995–2002 |
| Toyota | Corolla 2000-2007 | 2000–2005 |
| Toyota | Corona 1983-1992 | 1986–1992 |
| Toyota | Corona 1992-1998 | 1992–1998 |
| Toyota | Echo / Platz 1999-2005 | 2000–2005 |
| Toyota | MR2 1984-1989 | 1986–1989 |
| Toyota | MR2 1989-1999 | 1989–1999 |
| Toyota | MR2 Spyder 1999-2007 | 1999–2005 |
| Toyota | Paseo / Cynos 1991-1997 | 1991–1997 |
| Toyota | Paseo / Cynos 1997-1999 | 1997–1999 |
| Toyota | Raum 1997-2003 | 1997–2003 |
| Toyota | Raum 2003-2011 | 2003–2005 |
| Toyota | Starlet 1984-1989 | 1986–1989 |
| Toyota | Starlet 1989-1996 | 1989–1996 |
| Toyota | Starlet 1996-1999 | 1996–1999 |
| Toyota | Supra 1986-1993 | 1986–1993 |
| Toyota | Supra 1993-2002 | 1993–2002 |
| Toyota | Supra/Celica XX 1981-1986 | 1986 |
| Toyota | T100 | 1992–1998 |
| Toyota | Vios 2007-2013 | 2009–2010 |
| Toyota | Yaris 1999-2005 | 1999–2005 |
| Toyota | Yaris 2005-2011 | 2005 |
Color Details
- Make
- Scion
- Paint code
- 8B6
- Color name
- Strong Blue Metallic
- Years
- 1986–2010
- Stage
- Tri-Stage
- Finish
- Tri-Coat, Pearl, Metallic
- Color family
- Blue
- Undercoat
- APU108 (required)
- Ground coat
- Gray sealer
- Paint type
- Solvent-based urethane basecoat
- Also listed as
- Lexus Strong Blue Metallic (8B6), Toyota Strong Blue Metallic (8B6)
Find Your Paint Code
Every vehicle has a paint code label. Match it before you order: our paint is mixed to order, so it can't be returned.
- Driver's door jambThe most common spot, on the sticker with the tire pressures.
- Under the hoodOn the radiator support or the strut tower.
- Trunk or spare tire wellCommon on older and European vehicles.
Look for the word Paint or Color next to the code. Yours should read 8B6.
Questions About This Color
Will this match my Scion's 8B6 paint?
Yes. It's mixed to the factory formula for Scion 8B6 Strong Blue Metallic. Check that the paint code on your vehicle reads 8B6.
What years and models use 8B6?
Scion used 8B6 from 1986–2010.
Do I need an undercoat for Strong Blue Metallic?
Yes. Strong Blue Metallic is a Tri-Stage color and goes over APU108 undercoat.
Where do I find my paint code?
On the paint code label, usually in the driver door jamb or under the hood.
Can I use this color on a vehicle that didn't come with it?
Yes. Many people use factory colors to customize other vehicles. You'll use the same sealer, APU108 undercoat and clearcoat.
Is Scion 8B6 the same paint as Lexus 8B6?
Yes. It's the same factory formula as Lexus's Strong Blue Metallic (8B6).