@staylo_streetwear IG
Lime Zest Painted Sample (White Ground Coat)
You’re $150 away from Free Shipping
Pro Grade Results. A Fraction of the Cost. No Experience Needed.
🚚 Free Shipping On Orders $150+ To The Lower 48 🎨
👉Risk Free Painted Samples👈 See colors in person!
Start typing to search the colors.
Your 3rd Can $30.00 USD
Regular price $59.99 USD
Buy 2 Custom Color Spray Cans, Get The 3rd Half Off
Buy 3 Basecoat Spray Cans, Get A Free 2K Clear Can
Free gift: 2K Clear Can
Counts toward up to 20% off when you spend $300+
Up To 20% Off When You Spend $300+
This item counts toward it. Applied automatically at checkout.
PICK YOUR COLOR, THEN SLAP ON THE INCLUDED LABEL & DROP IN YOUR MAILBOX. GET STORE CREDIT TOWARD YOUR PAINT.
Try adjusting the filter or view all products.
Add multiple colors so you can compare & fall in love with a paint color for your project!
Detail product
Lime Zest requires a White ground coat. We highly recommend staying in brand with Alpha ground coats: our complete system is made to work together for the right hue, coverage, adhesion and durability.
Finish with our 2K clear. We highly recommend staying in brand for guaranteed compatibility: our 2K clear cans are made to go over our basecoat for the right finish, durability and UV protection.
Your kit has everything to spray. These optional add-ons cover prep and finishing work.
Popular bundles and products.
Swipe for more →
Scuff & mask kits sized for your project, plus tape, film and covers for everything you’re not painting.
Swipe for more →
Scuff pads, paper and blocks to prep the surface, and filler, glaze and spreaders for dents.
Swipe for more →
Wet sanding kits and paper, compounds and polishes to cut and buff the clear, and coatings to protect it.
Swipe for more →
Respirators rated for paint and 2K clear, and spray suits.
Swipe for more →
Lime Zest Spray Can
Lime Zest is a chartreuse with a gold pearl glow. Depending on the light you'll see green, gold, chartreuse and yellow, but it isn't a color shift. It doesn't change color from different angles.
Colors look different on every screen, so we recommend a painted sample first.
STEP 1 – CLEAN THE SURFACE
1 - Wash with soap and water, rinse, and dry completely.
2 - Degrease using wax and grease remover or isopropyl alcohol.
3 - Wipe dry with a clean, lint-free towel.
STEP 2 – SCUFF / SAND FOR ADHESION
If Raw Plastic / Polyurethane: Evenly scuff bare plastic or raw surfaces. These will also need to be adhesion promoted prior to paint using our WolfBite Adhesion promoter.
If Good Condition OEM Paint: Sand smooth or glossy paint with P320-P400 grit sand paper or Scuff Pad until uniformly dull with no glossy areas.
If Surface Needs Bodywork or heavy scratches removed: Sand the damaged areas with 180 grit (feathered out into the panel) then do your bodywork. Finish in 220 Grit sanding. Then spot prime with high build primer - fading the primer out into the rest of the sanded panel covering the bodywork and any 220 grit scratches. (the good condition areas of the panel should have been sanded in 320-400 or scuff pad). Lastly, after the high build primer is dry and ready to be sanded (check tds for timeline), sand with 320-400 to match the rest of the panel.
After The above prep: Remove dust with compressed air or a clean microfiber towel.
STEP 3 – FINAL WIPE & TACK
1 - Wipe the surface again with isopropyl alcohol or wax and grease remover.
2 - Allow solvents to fully evaporate.
3 - Lightly wipe with a tack cloth immediately before spraying. Do not press hard. (optional but great step)
STEP 4 – SET UP YOUR SPRAY AREA
1 - Use a well-ventilated, well-lit area with good extraction fans
2 - Ideal conditions are 65–75°F (18–24°C) with 40–60% relative humidity.
3 - Keep the area free of open flames, sparks, or ignition sources.
4 - Wet the floor if your space allows to keep dust down
5 - Cover any items or areas in your space that you do not want to get overspray on
STEP 5 – PERSONAL PROTECTION
1 - Wear a respirator rated for organic or solvent vapors.
2 - Use nitrile gloves and safety goggles.
3 - Wear a paint suit
STEP 6 – SHAKE THE CAN
1 - Shake vigorously for 45–60 seconds.
2 - Invert the can several times while shaking to fully mix pigments and metallics.
STEP 7 – TEST SPRAY
ALWAYS DO A TEST SPRAY + SPRAY OUT CARD IF DOING OEM SPOT JOBS
1 - Spray on cardboard or a scrap panel.
2 - Confirm even spray pattern, correct color, and proper atomization.
3 - Adjust the spray can's nozzle to match your spray style or surface.
4 - If the can is not operating correctly, remove the cap completely, reseat it on the can, and twise the entire nozzle 360 degrees. Since our cans are made to order, sometimes there is slight paint build up and reseating the nozzle corrects this.
STEP 8 – SPRAYING TECHNIQUE
1 - Hold the can 5–6 inches from the surface.
2 - Keep the can perpendicular, 90 degrees to the panel at all times.
3 - Move at a steady speed using smooth, even passes. You are looking for medium wet coats NOT super wet, pooling coats.
4 - Overlap each pass by 50 percent.
STEP 9 – TRIGGER CONTROL
1 - Begin moving before pulling the trigger. Start off of the panel then move onto the panel. This avoids build up on edges.
2 - Fully depress the trigger while spraying.
3 - Release the trigger completely at the end of each pass.
4 - Stop spraying after clearing the panel edge by an inch.
STEP 10 – COATS & FLASH TIMES
1k Primer/Sealer
1 - Spray a medium wet coat on the entire panel (if not blending oem paint) to achieve a 75% coverage. This fills in the sanding scratches as well as gives a uniform , required ground coat color for the next steps.
2- Allow to flash dry for 5-15 minutes. Time depends on the product and environment.
3 - Apply the second medium-wet coat to achieve full coverage
4 - Allow to dry for 30 minutes or until the wet look fades so a dull, even finish and is completely dry to the touch.
GROUNDCOATS or SOLID COLORS (BEFORE MIDCOATS IF APPLICABLE)
This is for our Base Black, OEM Undercoats or solid colored basecoats. Not all projects require this step.
1 - Apply the first medium-wet coat at approximately 75 percent coverage.
2 - Allow to flash 5-15 minutes or until the wet look fades so a dull, even finish. Time depends on the product and environment.
3 - Apply the second medium-wet coat to achieve full coverage
4 - Allow to flash 5-15 minutes or until the wet look fades so a dull, even finish. Time depends on the product and environment.
5 - Apply a Third medium wet coat if the color is not 100% covered and even at this point. This will vary based on the color and product being sprayed.
4 - Flash another 15-30 minutes. Until the surface is even, dull, an dry to the touch.
MIDCOAT , CUSTOM COLORS , OR METALLIC/ PEARL OEM
This is for coverage over required groundcoats , not "ghost effect"
1 - Apply medium coats over the required groundcoat for your color.
2 - Flash 5–15 minutes between coats or until tack-free.
3 - Apply additional coats until the desired color depth is achieved. Most custom and oem colors require 2-4 medium coats - check color description or compare to existing oem panels
4 - Apply 1 light "control" coat to make sure all of the pearl or metallic is even and not splotchy or "tiger striped"
5 - Once the entire surface, even cracks and crevices, is completely dry to the touch, wait 15 minutes in a temperature-controlled paint booth. In any other environment at 70°F or warmer, wait 30 minutes to 1 hour. Then move on to the topcoat step.
EFFECT PEARL / COLORSHIFT COAT
This is for effect over light groundcoats (not for coverage)
1 - Apply one light effect coat at approximately 25 percent coverage.
2 - Allow 5-15mins for the coat to flash before adding another light coat (if you want to add more effect)
Repeat as many times to your preference of effect and coverage.
3 - Once the entire surface, even cracks and crevices, is completely dry to the touch, wait 15 minutes in a temperature-controlled paint booth. In any other environment at 70°F or warmer, wait 30 minutes to 1 hour. Then move on to the topcoat step.
STEP 11 – CLEANUP & STORAGE
CAP CLEARING
1 - Turn the can upside down after spraying.
2 - Spray until only clear propellant comes out.
3 - This clears paint from the valve and prevents clogging.
NOZZLE CARE
1 - Remove the spray nozzle after use.
2 - Wipe clean with solvent.
3 - Do not soak the nozzle in solvent.
STORAGE
1 - Store cans upright in a cool, dry place.
2 - Keep away from direct sunlight.
3 - Avoid freezing conditions.
4 - Do not store above 120°F (49°C).
QUICK TROUBLESHOOTING
1 - Dry or rough texture means the can is too far away or moving too fast.
2 - Runs or sags mean the can is too close or moving too slowly.
3 - Continue to shake and agitate the can between coats- Repeat step 6
4 - If ever unsure the color is 100% covered (and you are going for coverage) - one extra coat is always a good idea.
Lime Zest Spray Can
$59.99 USD
Overall rating: 5.0 / 5 from 8 reviews.
@staylo_streetwear IG
Victor C. 5/5 Verified
Lime Zest Painted Sample (White Ground Coat)
Store owner replied: Thank you for the feedback, Victor! We really appreciate your support. 🤝
Shot it over a silver camera out awesome, for a quick little job for parts for my motor !
Travis H. 5/5
Store owner replied: Thank you for the feedback, Travis! We’re so glad to hear the Lime Zest Paint Basecoat worked great over silver and gave you the results you were looking for. It looks incredible—thanks for sharing the photo with us, and we appreciate your support!
It was amazing
Jose Javier O. 5/5 Verified
Store owner replied: Thank you for the feedback, Jose. That Lime Zest looks absolutely amazing on your car! We love how it turned out. Thanks for sharing the photo and trusting us with your project!
Kind of tricky for a DIY person !
James W. 5/5 Verified
Store owner replied: Thanks so much for the feedback, James! The car looks absolutely fantastic! That Lime Zest paint really pops and gives it a bold, vibrant look. We know it can be a bit tricky as a DIY project, but you did an excellent job bringing it to life. 🙌🙌🙌
Here's the teal, pearl white next, then the lime zest green will go down the middle of the hood. Great products, ill update with finish project soon!
James J. 5/5 Verified
Store owner replied: Thank you for the update! It sounds like a great project, and we’re pleased to hear you're satisfied with the products. We look forward to seeing the finished result!
The samples are great, don’t make the same mistake I made with TCS and purchase the paint color by the internet picture…
Fred B. 5/5 Verified
Lime Zest Painted Sample (White Ground Coat)
Store owner replied: Thank you for your feedback, Fred! We’re glad the painted samples helped you see the true colors before committing to a full purchase. It’s always wise to view samples first and we're glad it worked out for you. We appreciate your support! 🤝
If anything like last paint will be great paint
Todd B. 5/5 Verified
Store owner replied: Thank you for the feedback, Todd! We really appreciate your continued support and committed to maintaining the same high quality you’ve come to expect. 🤝
I haven’t painted it yet but I’m building the car for my wife and she picked the color and she loves the lime zest. When I get it painted I will post some pictures, it’s a 1941 Chevrolet 2 door coupe !
James W. 5/5 Verified
Store owner replied: Thank you for the feedback, James! We’re so glad your wife loves the Lime Zest paint; it’s such a fun and vibrant color. A 1941 Chevy 2-door coupe is a beautiful choice—we can’t wait to see it all come together. Definitely send us photos when it’s painted, we’d love to feature your project! 🤝
Everything you need to paint your mountain bike, road bike, or other!
High quality paints that give professional results to the DIY'er.
Everything you need to paint your motorcycle, car, SUV, or truck!
Just choose your color and answer 4 questions. We handle the rest!
This is the paint brand that Tommy, the owner of TSS started 10+ years ago. We now dont only offer custom colors but all the products metal up! Primers, reducers, basecoats, clearcoats and everything in between.
Black Friday 2026Starts in Fri, Nov 13
Spend more, save more: 10% off $300+, 15% off $600+, 20% off $1,000+. Plus a new flash sale every day.
Black Friday Is LiveEnds in Mon, Nov 30
10% off $300+, 15% off $600+, 20% off $1,000+, plus a free TSS spray suit at $1,500+. Applied automatically at checkout. Exclusions apply.
Changing the reduction or temperature will reset your current bundle selection.
Bundle components are generated based on these settings, so your selected products will be cleared automatically.
Do you want to continue?
Black Friday 2026
For:
Join the Black Friday VIP list by email, text or both.You are on the VIP list. Want it faster? Add texts or turn on app alerts.
You’re on the Black Friday VIP list. We’ll let you know the moment each flash sale unlocks.
Use your email, your mobile number, or both.