Your favorite pigments now in a spray can! Pre mixed and reduced, just shake it up and spray it over sealer or a properly prepped surface!
Best over a Black Basecoat or any base color! ( if you need surface filling , Use Epoxy Primer & Sealer Spray Can 1k or sanded high build primer spray cans!)
This color is available in Automotive Paint, Dry Pigment & full vehicle paint kits as well.
This is a 1k basecoat and needs to be sprayed over the recommended Epoxy Sealer & topped with 2k HS Spray Can Clearcoats or any other 2k clearcoat.* These are Basecoat Midcoats ( 1k Midcoats ) Where the basecoat REALLY matters. We highly recommend sticking the basecoats we suggest above for best results. *
STEP 1 – CLEAN THE SURFACE
1 - Wash with soap and water, rinse, and dry completely.
2 - Degrease using wax and grease remover or isopropyl alcohol.
3 - Wipe dry with a clean, lint-free towel.
STEP 2 – SCUFF / SAND FOR ADHESION
If Raw Plastic / Polyurethane: Evenly scuff bare plastic or raw surfaces. These will also need to be adhesion promoted prior to paint using our WolfBite Adhesion promoter.
If Good Condition OEM Paint: Sand smooth or glossy paint with P320-P400 grit sand paper or Scuff Pad until uniformly dull with no glossy areas.
If Surface Needs Bodywork or heavy scratches removed: Sand the damaged areas with 180 grit (feathered out into the panel) then do your bodywork. Finish in 220 Grit sanding. Then spot prime with high build primer - fading the primer out into the rest of the sanded panel covering the bodywork and any 220 grit scratches. (the good condition areas of the panel should have been sanded in 320-400 or scuff pad). Lastly, after the high build primer is dry and ready to be sanded (check tds for timeline), sand with 320-400 to match the rest of the panel.
After The above prep: Remove dust with compressed air or a clean microfiber towel.
STEP 3 – FINAL WIPE & TACK
1 - Wipe the surface again with isopropyl alcohol or wax and grease remover.
2 - Allow solvents to fully evaporate.
3 - Lightly wipe with a tack cloth immediately before spraying. Do not press hard. (optional but great step)
STEP 4 – SET UP YOUR SPRAY AREA
1 - Use a well-ventilated, well-lit area with good extraction fans
2 - Ideal conditions are 65–75°F (18–24°C) with 40–60% relative humidity.
3 - Keep the area free of open flames, sparks, or ignition sources.
4 - Wet the floor if your space allows to keep dust down
5 - Cover any items or areas in your space that you do not want to get overspray on
STEP 5 – PERSONAL PROTECTION
1 - Wear a respirator rated for organic or solvent vapors.
2 - Use nitrile gloves and safety goggles.
3 - Wear a paint suit
STEP 6 – SHAKE THE CAN
1 - Shake vigorously for 45–60 seconds.
2 - Invert the can several times while shaking to fully mix pigments and metallics.
STEP 7 – TEST SPRAY
ALWAYS DO A TEST SPRAY + SPRAY OUT CARD IF DOING OEM SPOT JOBS
1 - Spray on cardboard or a scrap panel.
2 - Confirm even spray pattern, correct color, and proper atomization.
3 - Adjust the spray can's nozzle to match your spray style or surface.
4 - If the can is not operating correctly, remove the cap completely, reseat it on the can, and twise the entire nozzle 360 degrees. Since our cans are made to order, sometimes there is slight paint build up and reseating the nozzle corrects this.
STEP 8 – SPRAYING TECHNIQUE
1 - Hold the can 5–6 inches from the surface.
2 - Keep the can perpendicular, 90 degrees to the panel at all times.
3 - Move at a steady speed using smooth, even passes. You are looking for medium wet coats NOT super wet, pooling coats.
4 - Overlap each pass by 50 percent.
STEP 9 – TRIGGER CONTROL
1 - Begin moving before pulling the trigger. Start off of the panel then move onto the panel. This avoids build up on edges.
2 - Fully depress the trigger while spraying.
3 - Release the trigger completely at the end of each pass.
4 - Stop spraying after clearing the panel edge by an inch.
STEP 10 – COATS & FLASH TIMES
1k Primer/Sealer
1 - Spray a medium wet coat on the entire panel (if not blending oem paint) to achieve a 75% coverage. This fills in the sanding scratches as well as gives a uniform , required ground coat color for the next steps.
2- Allow to flash dry for 5-15 minutes. Time depends on the product and environment.
3 - Apply the second medium-wet coat to achieve full coverage
4 - Allow to dry for 30 minutes or until the wet look fades so a dull, even finish and is completely dry to the touch.
GROUNDCOATS or SOLID COLORS (BEFORE MIDCOATS IF APPLICABLE)
This is for our Base Black, OEM Undercoats or solid colored basecoats. Not all projects require this step.
1 - Apply the first medium-wet coat at approximately 75 percent coverage.
2 - Allow to flash 5-15 minutes or until the wet look fades so a dull, even finish. Time depends on the product and environment.
3 - Apply the second medium-wet coat to achieve full coverage
4 - Allow to flash 5-15 minutes or until the wet look fades so a dull, even finish. Time depends on the product and environment.
5 - Apply a Third medium wet coat if the color is not 100% covered and even at this point. This will vary based on the color and product being sprayed.
4 - Flash another 15-30 minutes. Until the surface is even, dull, an dry to the touch.
MIDCOAT , CUSTOM COLORS , OR METALLIC/ PEARL OEM
This is for coverage over required groundcoats , not "ghost effect"
1 - Apply medium coats over the required groundcoat for your color.
2 - Flash 5–15 minutes between coats or until tack-free.
3 - Apply additional coats until the desired color depth is achieved. Most custom and oem colors require 2-4 medium coats - check color description or compare to existing oem panels
4 - Apply 1 light "control" coat to make sure all of the pearl or metallic is even and not splotchy or "tiger striped"
5 - Wait 30 mins or 15 mins after the surface is completely dull and dry to the touch before moving on to topcoat step.
EFFECT PEARL / COLORSHIFT COAT
This is for effect over light groundcoats (not for coverage)
1 - Apply one light effect coat at approximately 25 percent coverage.
2 - Allow 5-15mins for the coat to flash before adding another light coat (if you want to add more effect)
Repeat as many times to your preference of effect and coverage.
3 - Wait 30 mins or 15 mins after the surface is completely dull and dry to the touch before moving on to topcoat step.
STEP 11 – CLEANUP & STORAGE
CAP CLEARING
1 - Turn the can upside down after spraying.
2 - Spray until only clear propellant comes out.
3 - This clears paint from the valve and prevents clogging.
NOZZLE CARE
1 - Remove the spray nozzle after use.
2 - Wipe clean with solvent.
3 - Do not soak the nozzle in solvent.
STORAGE
1 - Store cans upright in a cool, dry place.
2 - Keep away from direct sunlight.
3 - Avoid freezing conditions.
4 - Do not store above 120°F (49°C).
QUICK TROUBLESHOOTING
1 - Dry or rough texture means the can is too far away or moving too fast.
2 - Runs or sags mean the can is too close or moving too slowly.
3 - Continue to shake and agitate the can between coats- Repeat step 6
4 - If ever unsure the color is 100% covered (and you are going for coverage) - one extra coat is always a good idea.
Overall rating: 4.9 / 5 from 26 reviews.
It’s beautiful in the sun!!!
Diamond Purple Paint Basecoat Midcoat
Store owner replied: Thank you for the feedback, Shane! We’re so glad to hear you love the Diamond Purple! It’s definitely a beautiful color, and it really pops when it’s out in the sunlight. We appreciate your support! 🤝
Came out way better then I thought. Definitely worth it, they even got tips and tricks videos.
Diamond Purple Spray Can Midcoat
Store owner replied: Thank you for the great feedback, Anthony. Great work! We’re so glad to hear the Diamond Purple paint finish exceeded your expectations and that the tips and tricks videos were useful. Your project looks amazing! 🙌🙌
@That_f80_ great diamond specs made the purple spray I used pop even more awesome paint going to use it on my calipers as well
Diamond Purple Spray Can Midcoat
Store owner replied: Thank you for the feedback and for sharing the photo of your project, Lloyd! That engine bay looks incredible! The Diamond Purple really brings it to life and makes those details stand out. Can’t wait to see how it turns out on your calipers too! Thanks again for supporting TSS. 🤝
Thai stuff is great, real high quality and looks amazing!!! Very happy with this product :D
Diamond Purple Spray Can Midcoat
Store owner replied: Thanks so much for the amazing feedback, Olivia! We’re glad to hear that you’re loving the Diamond Purple Spray Can Midcoat! It’s always exciting to see our products being used in cool projects like yours, and that bike looks amazing in the video you sent. We truly appreciate your support! 🤝
So I’m not a painter by any means, but recently got into cars and after making my car look cool, I wanted my 1yo daughters car to match. With not the best prep on my part, this paint came out amazing. I was so impressed with it even before the clear coat went on. I was thinking that a sparkle effect like this would be very minimal but I was very wrong. This s*** dances in the light! 10/10 will def be buying more for any other fun projects.
Diamond Purple Spray Can Midcoat
Store owner replied: Thank you so much for the awesome feedback, Zachary! We love that you brought your daughter’s car into the fun—what a cool project. It’s great to hear the paint exceeded your expectations and brought that sparkle to life, even without the clear! The photos you sent look fantastic, and we’re honored to be part of such a fun memory. Can’t wait to see what you tackle next! 🤝
Absolutely love this diamond purple! It’s got a great shimmer to it, a nice pop of purple that’ll let people know that it’s a nice custom type of color. Effortless to spray which is a major plus especially for a DIY
Diamond Purple Paint Basecoat Midcoat
Store owner replied: That looks AWESOME! Love the effect on the engine cover!
Adjusting your pearl load allows this pearl to do amazing things over a black base. Highly recommended
Diamond Purple Dry Pearl Pigment
Store owner replied: Yes sir! Killer results on that ride! Thanks for supporting our small business!
Follos the directions, take your time, and its as good as a big money paint. For reference we used the 3 coats of 2k Black Primer, 3 Coats of Diamond Purple Heavy Flake, 3 Coats of Clear. Wet sand and polish as needed.
Diamond Purple Spray Can Midcoat
Store owner replied: Awesome results! So glad you guys like it! Thanks for supporting our small business.
The effect was exactly what I was looking for. Great that it was premixed. No fuss no muss
Diamond Purple Paint Basecoat Midcoat
Store owner replied: Thank you for the feedback, WIlbur! We’re glad to hear the effect turned out exactly as you were looking for and that the premixed formula made the application simple and hassle-free. We really appreciate you choosing TSS and sharing your experience!
Paid for express shipping and “skip line processing but item tool a week to arrive.
Diamond Purple Spray Can Midcoat
Store owner replied: We appreciate your honest feedback, Matt. First, we'd like to sincerely apologize for the delay in shipping your order (51402TSS). We completely understand how frustrating it can be to wait, especially after adding Skip the Line, and we truly appreciate your patience. Our warehouse team, along with the owner, has been working hard to process and ship orders as quickly as possible. Due to our recent sale, we experienced a much higher order volume than usual, which has unfortunately resulted in longer processing times. We did our best to communicate these expected delays through notices on our website and a video update from the owner. That said, I checked the order now and it has already been shipped out. Here's the tracking number for your reference: 9436250206217001233299 (USPS.We truly appreciate your continued patience and understanding, and we're very sorry again for the inconvenience.
Awesome paint and fast shipping
Diamond Purple Spray Can Midcoat
Store owner replied: Thank you for the feedback, Seth! We're glad to hear you love the Fever Dream paint and the shipping was fast. We truly appreciate your support! 🤝
the assiciated color was great, and the sample provided illustrated its dynamics, but it was just too dark for what i was looking for.
Diamond Purple Painted Sample (Black Ground Coat)
Store owner replied: Thank you for the feedback! We’re happy you liked the effect, and we appreciate the note about the depth — that’s helpful for other customers too.
I haven’t completely used it yet. Got it mixed in an inner coat clear did a stick check. OMG I can’t wait. I may be ordering some more of this. Thanks guys. You guys are awesome.
Diamond Purple Dry Pearl Pigment
Store owner replied: Thank you for the feedback, John! We’re so glad to hear you’re loving the Diamond Purple Dry Pearl Pigment and can’t wait to see it in action. We’d be glad to have you order more anytime! 🤝
Is a great product. Very content with it.
Diamond Purple Spray Can Midcoat
Store owner replied: Thank you for the feedback, Shane! We’re really glad to hear you’re happy with the Diamond Purple paint. It’s a beautiful color, and we appreciate you taking the time to share your experience. Thanks again for supporting TSS! 🤝
I would like to say i finished my paint job but I didn't didn't have enough paint to finish the job. The wrong amount showed up, and my customer wasn't happy with waiting for more to arrive. So i had to buy my customer new stretch kit and had to go with a different color of their choice. So I couldn't afford more paint after all that im a small business as well. As a owner I had to make the customer happy. I have half painted bags fender tank covers as wall art now. But the paint did look good.
Great stuff
Diamond Purple Dry Pearl Pigment
Store owner replied: Thanks so much for the feedback and for supporting TSS, James! 🤝
Amazing
Loved the paint boss maybe we can get a brand deal with sum clear coat cans the drift car is looking real good after the paint I’ve already offered you guys to a few of friends and from I know we will stay in business lmk we can get a deal in @joker_21310@icloud.com 6025760713 instagram -@_3filmz
Diamond Purple Spray Can Midcoat
Store owner replied: Thank you for the positive feedback! We're glad to hear you're happy with the results and appreciate your support!
Super fast shipping. Top notch products... can't go wrong. Lifetime of creating booth magic
Diamond Purple Dry Pearl Pigment
Store owner replied: Thank you so much for your feedback, Jerry! We're glad you're happy with the upgrade and our fast shipping. Keep making that booth magic happen—we appreciate your support! :)
Like your other products,great intensity,depth and quality.
Diamond Purple Dry Pearl Pigment
Store owner replied: Thank you for your feedback, John! We're happy to hear you’re enjoying the intensity, depth, and quality of our products. Thank you for supporting TSS! :)
BOOM
Diamond Purple Vehicle Paint Kit
Store owner replied: Hi there! Thank you for your kind words and feedback. We thank you as well for supporting our small business!
Had an issue with can lacking propellant. The team at TSS immediately sent a replacement, and helped resolve a different issue that was fault of their own. Very helpful and courteous. 5 Stars. Will use agin.
Diamond Purple Spray Can Midcoat
Store owner replied: Hi Paul! We truly appreciate your kind words and feedback! Customer satisfaction is our top priority. Thank you so much for your love and support! We really appreciate your business :)
The paint was amazing the only downside is the price is pretty high especially for a 7.5 oz can
Diamond Purple Spray Can Midcoat
Store owner replied: Hi Kevin! We're happy that you love our product. We pride ourselves on being as affordable as possible while also keeping the highest quality possible. We will never be the cheapest overall - but we are aggressively priced compared to other products of the same quality. Thank you!
All Diamond pearls are ultra-vivid, metallic pearls with amazing coverage and effect. Diamond Purple over black will get you very close to the highly desired Midnight Purple for a fraction of the price.
This color is absolutely stunning!! I used it over tamco purple pop, to just give it a bit more bling, and it looks awesome!!
Used this on top of the XENON COLORSHIFT and it added a great effect to it.
Everything you need to paint your mountain bike, road bike, or other!
High quality paints that give professional results to the DIY'er.
Everything you need to paint your motorcycle, car, SUV, or truck!
Just choose your color and answer 4 questions. We handle the rest!
This is the paint brand that Tommy, the owner of TSS started 10+ years ago. We now dont only offer custom colors but all the products metal up! Primers, reducers, basecoats, clearcoats and everything in between.
