Got your kit? Let's paint.
Everything on the card, with the videos. Pick your project below.
What's in your box?
Tap your kit for its step-by-step, videos and coverage notes.
Before you pop a cap
1. Warm it up. Cans and the part should be 65–75°F. A cold can sputters. Warm it in a bucket of warm water, never with heat.
2. Shake 45–60 seconds. Then keep shaking between coats.
3. Test spray on cardboard. If the pattern is off, pull the cap, reseat it and twist it a full turn.
4. Prep is 80% of the job. Clean, scuff until there are no shiny spots, mask, wipe again.
Safety First
2K clear contains isocyanates. Spray with good airflow, and wear a paint-rated respirator, gloves and goggles every time.
Activating your 2K clear can
The clear in your kit is a true 2K. Activate it right before you spray and use it within the pot life.
Lost the card? Download it
The spray can cheat sheet: 12 directions, coats & flash times, project notes and the QR codes.
Tutorials & deep dives
Long-form how-tos from The Spray Source YouTube channel.
No tutorials on this topic yet. Browse everything on our YouTube channel.
Tommy answers your questions
Real questions from the community, answered by Tommy Nelson on TikTok.
No answers on this topic yet. Browse everything on Tommy's TikTok.
Stuck mid-project? Ask a real painter
Tap a question or open the chat. We answer fast, and we know exactly what's in your kit.
